Model 110B
The E-Z Drill Model 110B is a compact, single-gang on-grade concrete drill designed for confined spaces and tight, 3-foot patches.
Achieve greater efficiency with the 110B single-gang, on-grade drill that’s equipped with dual-purpose guide wheels to quickly transition from riding along the face of the slab to moving around the jobsite. The drill operates on the subgrade and fits in a 3-foot patch. A minimum of 50 cfm is required to run the totally pneumatic system, which can drill holes as deep as 12 inches in diameters of 5/8 of an inch to 2 inches. Users can install the optional hole spacing guide, which clearly indicates where to place the 170-pound drill, for even greater accuracy and efficiency when repositioning.
Specifications
| Drill Depth | 12” |
|---|---|
| Drill Depth Dust Collection | 9 3/4” |
| Drill Bit Diameter | 5/8” to 2” |
| Air Consumed | 50 cfm |
| Air Consumed Dust Collection | 90 cfm |
| Hose Size | 3/4" |
| Operating Pressure | 90 psi |
| Drill Distance from Corner | 6” |
| Drill Distance from Ground | 3” |
| Height | 32” |
| Height w/ Dust Collection | 70 1/2" |
| Length | 41 1/2" |
| Length w/ Back Wheel Removed | 34 7/8” |
| Length DustColl BkWheel Gone | 37 3/8” |
| Width | 18 1/4" |
| Weight | 215 lbs |
| Weight w/ Dust Collection | 306 lbs |
| Drill Motor (pneumatic) | CP 22 |
| Drill Motor Weight | 29 lbs |
| Chuck Size (in) | 7/8” x 3 1/4" |
| Impact (ft. lbs./blow) | 24 fpb |
| Blows (minute) | 2600 bpm |
| Rotations/minute | 210 rpm |
| Drill Depth | 12” |
|---|---|
| Drill Depth Dust Collection | 9 3/4” |
| Drill Bit Diameter | 5/8” to 2” |
| Air Consumed | 50 cfm |
| Air Consumed Dust Collection | 90 cfm |
| Hose Size | 3/4" |
| Operating Pressure | 90 psi |
| Drill Distance from Corner | N/A |
| Drill Distance from Ground | Up to 12” |
| Height | N/A |
| Height w/ Dust Collection | N/A |
| Length | N/A |
| Length w/ Back Wheel Removed | N/A |
| Length DustColl BkWheel Gone | N/A |
| Width | N/A |
| Weight | 215 lbs |
| Weight w/ Dust Collection | 306 lbs |
| Drill Motor (pneumatic) | CP 22 |
| Drill Motor Weight | 29 lbs |
| Chuck Size (in) | 7/8” x 3 1/4" |
| Impact (ft. lbs./blow) | 24 fpb |
| Blows (minute) | 2600 bpm |
| Rotations/minute | 210 rpm |